MakerBot PLA Filament for Replicator 2
- Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of printing.
If you’re new to 3D printing, MakerBot PLA Filament is a good material to start with because it’s easy to use and performs well on most prints.
MakerBot PLA Filament adheres well to acrylic and to blue painter’s tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.
Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.
Be sure your build plate is level, clean and oil-free before printing.1 KG Spool Dimensions & Weights
20.32 cm (8 in)
7.62 cm (3 in)
Spool Hub Hole
5.08 cm (2 in)
1.36 KG (3 LB)
1 KG (2.2 LB)
60~65° C (140~149° F)
150~160° C (302~320° F)
230° C (446° F)